Passionate Passivity

Materials for High-Precision Passive Tracking System Construction

1-watt photovoltaic panel
Panel-compatible battery clips
2 12 x 16 x 1 cm wooden board bases
20 5 x 5 x 12 cm wooden pieces
5 x 5 x 25 cm wooden piece
16 10 mL plastic containers
16 rubber o-rings
16 plastic rods
20 metal cable straps
Standard wooden craft ball
16 metal strips
Metal screws
Hobby model airplane fuel tank tubing
Standard acrylic latex black paint
Standard paint brush
Standard duct tape
Standard metal hand saw
Standard drill press
Standard mitre saw
Standard wood glue

Materials for High-Precision Passive Tracking System Testing

Designed passive tracking system
Digital multimeter
High resolution digital camera
Colour printer
Standard angle protractor
Standard ruler
Electrical lamp base
300-watt light bulb

(The information displayed is for the system Design 1.0, utilized in March 2008. A completely upgraded and significantly different system, known as Design 2.0, will be first presented at the Intel International Science and Engineering Fair in May 2008.

This website details preliminary work for Passionate Passivity, corresponding with the Calgary Youth Science Fair in March 2008. Significant project changes and design modifications have been made to Passionate Passivity since the creation of this website. To ensure intellectual property protection, final work spanning from approximately June 2007 to April 2008 will be first presented at the Intel International Science and Engineering Fair (ISEF) in May 2008. This website should not be utilized as a reference for Eden Full's ISEF 2008 research.)


Home	Problem Problem and Purpose Background Objectives Variables Hypothesis	Conventional Materials Procedure Observations Managed Data Discussion	Designed Design Materials Procedure Observations Managed Data	Conclusion Analysis Conclusion Applications Sources of Error Future Directions	Credits
Materials
Materials for High-Precision Passive Tracking System Construction 1-watt photovoltaic panel Panel-compatible battery clips 2 12 x 16 x 1 cm wooden board bases 20 5 x 5 x 12 cm wooden pieces 5 x 5 x 25 cm wooden piece 16 10 mL plastic containers 16 rubber o-rings 16 plastic rods 20 metal cable straps Standard wooden craft ball 16 metal strips Metal screws Hobby model airplane fuel tank tubing Standard acrylic latex black paint Standard paint brush Standard duct tape Standard metal hand saw Standard drill press Standard mitre saw Standard wood glue Materials for High-Precision Passive Tracking System Testing Designed passive tracking system Digital multimeter High resolution digital camera Colour printer Standard angle protractor Standard ruler Electrical lamp base 300-watt light bulb (The information displayed is for the system Design 1.0, utilized in March 2008. A completely upgraded and significantly different system, known as Design 2.0, will be first presented at the Intel International Science and Engineering Fair in May 2008. This website details preliminary work for Passionate Passivity, corresponding with the Calgary Youth Science Fair in March 2008. Significant project changes and design modifications have been made to Passionate Passivity since the creation of this website. To ensure intellectual property protection, final work spanning from approximately June 2007 to April 2008 will be first presented at the Intel International Science and Engineering Fair (ISEF) in May 2008. This website should not be utilized as a reference for Eden Full's ISEF 2008 research.)
Copyright © Eden Full, 2008. All rights reserved. Contact: spacecamper@gmail.com.