HOW TO MAKE THE MODEL OF THE LUNAR LANDER!!!

First off you need to have:

1. Paper Maché already made

2. Cardboard

3. 1 balloon

4. 4 nails

5. Scissors

6. Glue

7. Silver spray paint

Now that you have all the ingredients to make this cool little model, you need to know how you make it:

1. Take the cardboard and make a sort of flat square prism shape, but make two of them and then blow up a balloon and tie it.

2. Then you will wait for the glue to dry for a while, but don't go to early of it will be ruined.

3. When they have been dried, you will then cover the three shapes with your paper maché. Wait for that to dry also.

4. Before going further pop the balloon that was inside of the paper maché casing. 

5. When you have finished this task you should then glue all shapes together, here's the order to glue them together from top to bottom: The sphere shape on top, then one of the flat prisms, then the other one but you need to turn it about a quarter turn so it look like an eight pointed star. Wait for this to dry and go to the next task.

6. When it has finished drying, you need to put the four nails on the corners and make it snug and tight. Important Note: Try not to move the nails around to much or the nails won't have any holding and fall out.

7. Then try and make a ladder out of the spare cardboard and glue it to the side of the Lunar Lander.

8. The final task is probably the easiest and most satisfying to do: All you need to do is spray paint the whole thing silver. And finito, you are finished and you can admire it and show it to all your friends.

p.s. if you want you can get a box and fill it with fresh dirt and spray paint that too.

YOUR WELCOME!!!              BACK TO HOMEPAGE!!!