Development of an Embedded 3D Object Visual System
home project info schematics programs credits
background
objective
hypothesis
materials
procedure
results
analysis
applications
discussion
send e-mail
Materials
 

Materials Used:

  • Computers for programming, viewing results, and debugging
    laptop







  • Microcontroller programmer
    programmer







  • Microcontroller debugger
    debugger







  • 30MHz Oscilloscope
    oscilloscope






  • 2 small grayscale video cameras







  • QBASIC language
  • Visual Basic language
  • C++ language
  • MPASM microcontroller language
  • Adjustable power supply
  • 7 PIC18F452 microcontrollers
  • 1 PIC16F628 microcontroller
  • 2 LM1881 video sync separators
  • 2 TDA8708 video analog to digital converters
  • 2 MSM518221A video RAMs
  • 4 74LS164 shift registers
  • 2 DS1230-120 256k bit RAMs
  • PAKII math co-processor
  • L293D stepper motor drivers
  • 2 0.9 deg/step unipolar stepper motors
  • Several connectors for debugger
  • Several parallel ports
  • 2 video camera power plugs
  • 2 RCA plugs
  • Several LM7805 & LM7812 voltage regulators
  • 3 4049 Invertors
  • 2 47ACT11008 AND gates
  • Assorted resistors, capacitors, oscillators, inductors
  • Soldering Iron
  • Lots of small wire
  • 4 sockets for SOIC & SOJ ICs
  • Jumpers & jumper headers
Copyright © Malcolm Stagg 2004. All Rights Reserved.
Website: http://www.alumni.ca/~stag4m0. E-mail: malcolmst@shaw.ca.